News of x-sim

As of today the "Game profile & plugin discussions" forum is redivided by game so it's easier to start discussions about profile and plugin settings for a specific game.

Feel free to share your profile settings and discuss about them in this forum. This will make it easier for "new" users to learn about profiles and improving your own!

Your game isn't listed? No worries: simply post your topic in the main section and one ...

Good day every one ....

while searching on the internet for something you want ... you could find something else passing by that is good ... but it is just not the time for it now ...and you'll come back to it later ...
I find this a problem ... to me I can't find it any more ... so decided to store every thing that is good to me online here and I like ...

Only choose Universal serial output as Interface and fill out like this picture (X-Sim 1.6.x screenshot, newer version does support this also):

Bild2.jpg

Now look if it is working ...

This is the cable schematic, send to me by the developer of the interface:

serial.jpg

Rock N Ride Serial Communications Protocol (Ver. 1.0)

* 2400 BAUD
* 1 Start Bit
* 8 Data Bits
* 1 Stop ...

Hallo, zusammen!
Seit lange Zeit baue ich Flugsimulatoren. Das ist mein aktuelles Homepit: http://youtu.be/EdsrOSJ_zdc
Bis jetzt hat es nie richtig mit der Motion funktioniert. BlackBox2 Motion Plattform, gesteuert von elektrischen Wagenheber ist nicht nur langsam, aber auch SEHR laut!

Vor kurzem habe ich Rock´n´Ride Restposten gekauft und baue daraus verschiedene Simulatoren (Nr.1 Rennsimulator, Nr2 für MS Flight SimulaotrX, Nr3. für Digital Combat Serie usw...)

Rock´n´Ride funktioniert jetzt mit original ...

So we recently started this project for school and here's what we have so far:

Arduino UNO - http://arduino.cc/en/Main/ArduinoBoardUno
Motor Shield - http://www.ladyada.net/make/mshield/

Can anyone be of assistance on how to get these to work with the X-Sim Extractor/Converter software, it would be much appreciated! Thanks 8)

100A+ continuous output
2.6KW
choice of 24V or 12V outputs (either @108A)
Regulated and stable.
$30

How can one do better than this? Thanks to all those who recommended this route. Much appreciated.

I just ordered two pairs, so now have 216A and 5.2KW regulated 24VDC output. $60. Why not, eh? Just don't touch the wrong two wires together...

(using HP PROLIANT DL580/ML570G3 parts converted the "proper" way to 24V by isolating DC output grounds)

Has anybody tried using the scooter motors from these guys:http://www.electricscooterparts.com/motors24volt.html

(The 24V 500W model #MOT-24500X3000B on that page is the one I'm currently looking at. Cross-compatible with MY1020 motor)

If it is indeed an MY1020 equavilent, then its specs would be (supposedly) this (so I'm more interested in your guys' experience with them, if any):

MY1020-24V.jpg

http://unitemotor.com/en/cp036.htm

$90 and reasonable shipping with those potential specs has my attention.

Shown in this post is my successful outcome using Hall Effect Feed back.

I had problems with noisy pots ( probably because they were cheap pots :D ) and I decided to experiment with a Hall effect alternative.

The system I made works very well. Absolutely not noise or jitters coming from the feedback. I can now put a bit of Derivitive into my motion - ...

vorrei costruire una piattaforma 3dof ,con motore ECMA-C20604ES (400W)
Serie a bassa inerzia Potenza: 400WCoppia Nominale: 1,27NmCoppia Massima: 3,82NmVelocità di rotazione nominale: 3000 rpmVelocità di rotazione massima,(http://shop.twintec.it/index.php?main_p ... x&cPath=96)

io non sò nulla di elettronica ho bisogno di molto aiuto. 2 motori per movimento/ 1 motore per imbardata,

vorrei costruire una cosa simile.

Amigos de X-Sim, seguimos ampliando las características de este subforo en español y facilitando a los usuarios de habla hispana la construcción de sus simuladores.

Esta vez vamos a crear un GLOSARIO de términos técnicos que son difíciles de traducir o quizá puedan parecer ambiguos al hacerlo.

A medida que vayáis encontrando términos o expresiones que no entendáis, las podéis ir publicando en este apartado o mandarlas por PM.

Gracias, fooons.