News of Actuators

Hay there,

I found these Firgelli linear actuators:

http://www.firgelliauto.com/product_inf ... cts_id=232

Did anyone tried these actuators instead of the SNC5/6?

The speed looks okay, also the stroke, but I am in doubt concerning the duty cycle.(Duty cycle 20% (2min on/8min off)

What do you guys think?

Frits

Can I sit on the seat during set initial position of SCN5.
For I can set initial position of SCN5 from min to max freely if Ieave the seat empty.
But If I sit on it,I can only change the position from small value to big value,but I can't change the value from big to small(but If I leave the seat,it is ok again)
That's mean the scn5 has enough force to push the seat,but ...

Hi All,

Brand new to actuators, and have been trying to locate either the SCN5 or SCN6 in Australia.

Does anyone know of any suppliers that sell these in Australia?
I got asked the below questions from one of the suppliers.
Can anyone provide the answers?

What is the required voltage… 12 or 24 volts

What is the max load / weight ?

What is the speed you require ?

What stroke length ?

Do ...

Just like the subject, can I use any RS485 compatible actuators? I'm planning to take a look around for my next simulator (I promise that I will show you when it's done), but I'm really happy of x-sim software, and I was wondering if I can use it with any other actuator. Thanks.

morgen zusammen,
hab mal die deutsche vertretung von wittenstein angeschrieben, aber leider nicht mit wirklich viel erfolg....dies kam zurück..!!

"vielen Dank für Ihre Anfrage und das damit verbundene Interesse an unseren Produkten.

Leider müssen wir Ihnen mitteilen, dass wir keine Geschäfte mit Privatpersonen durchführen. Der Verkauf unserer Produkte beschränkt sich ausschließlich auf gewerbetreibende Unternehmen.

Vielen Dank für Ihr Verständnis.

Mit freundlichen Grüßen"

http://www.wittenstein-us.com/Actuators ... rnary.html

vielleicht hat jemand die ...

I have some wheestle an squeaking in one of mine SCN5 actuators, and I have to lubricate it again, but I don't know wich type of "oil" I need to use... It is good if I gonna use WD40?

nabend,

hab letztens mal nen thread dazu gesehen, doch kann ihn irgendwie nicht mehr finden!
da hatte jemand ne alternative zu den scn vorgestellt, glaub die waren von nem amerikanischen hersteller!
aber dazu war glaub ich noch nicht´s weiter groß bekannt, außer die daten! da gings dann noch unter anderem um die preise und steuerung wenn ich mich nicht täusche! deswegen, würd ich gern wissen, ob es schon nähere bzw. weitere info´s dazu gibt!

thx ...

Hello everybody my name's Dmitry and yes, I'm Russian.

Since I'm a complete beginner here and I have problems with communication language, I expect your possible support with things I encountered with when I first touched upon the subject of motion simulator games.
There’re several issues at hand I’d very like to have a full answer to, so please, don't be mad on my English.

1. Actuators for commercial use:
Which ones are better? (Consider ...

I have seen that a lot of projects uses scn5 linear actuators, they are kind of expensive compared to wiper motors, at first look, they seams to have better performance and weight moving capacity, but... i just saw in ebay a big range of linear actuators... from other brands or kinds, that were cheaper... this kind of actuators can replays the scn5? for example: http://www.firgelliauto.com/default.php?cPath=69

obviusly there has to ...

Using Dyadics SCN5 and SCN6 servo linear actuators with X-Sim³

Hello,

I start this thread for the questions about how to wire and connect a SCN5 or SCN6 actuator to the PC.
Please do buy this starter sets directly from mirai factory outlet. They are cheap and we and mirai will support you with the fitting cables.
The actuators get full warranty and are the cheapest shipping solution you get. The link to the shop ...