News of Converter questions

hello guys

i set up my third axe snc5 i would like to use it for drift effect on grid2 instead of traction loss is it posssible ? and how ? i will really appreciate help !!

thanks

Hello,

many did ask for a solution to make a smaller effect with a bigger input.
Here is a example plugin which do this.
Copy this to X-Sim/Mathplugins directory and you will find it in the plugin list in the math setup.

Sample:
Make a new axis, add G-Force with speed. Now add the opposite plugin and you will see that maximum is minimum. This is not a invert which will mirror the input, it ...

Hey guys

I'm using the converter with a Velleman Module. I inserted a sequence with a dynamic value. This value goes to the Velleman dynamic output and changes the speed of my motors. The problem is now: I tried to make a new profile for no limits rollercoaster but the motors will not stop at the point of 0% or 100% of the reference input. The value of "Test axis result" is 0% or 100% ...

Is it possible to use a hardware to control the desktop sliders of the converter?
If yes,it will be more convenience.

Hello!
Here, I would like to run X-Sim, and TriDef 3D simultaneously to Play rFactor

Would you have a bright idea?

To summarize:
Each one launch an instance of rFactor
I've try to make a shortcut, but does'nt work
If I run TriDef3D with X-Sim, I get an error D3D

Heeeeelp!

Thank you for your ideas

I bought a bass shaker the other day and hooked up everything and it works when I test it in the interface setup, but when I start it and run the extractor it doesn't respond in game. I believe the profile settings are correct since I used my brothers profile and his works just fine. I noticed that it does say something in outsim like "Game Paused" in the options and wont let me uncheck ...

Hi Sir

Kangaroo set at Address 128, 9600 baud, Channel named 1, & 2, are recognised in the interface plugin window,

If I change any one of the parameters then the Kangaroo is not recognised.

For 6 dof, I would like to use 3 Kangaroo's @ 115200 baud, Address 128 ch1, ch2, / 129 ch3, ch4, / 130 ch5, ch6.

regards Terry

Hey,

I set up the game DiRT3(Steam) and while driving i can see the values in outsimDirt2. Now i click on "Start" in X-Sim motion converter but it says:

Error opening USO comport COM6.
The comport is used by another plugin or USO entry. You may disable all interface plugins and try to clean all USO comports.
Another reason could be a short disconnect of the USB line by interferences of the motor.
You must ...

Hello,

does any one have an idea what could cause the problem if outsimDirt2.exe doesn't forward the gamedata to the converter? Other games like ETS2 are working, and the outsimDirt2.exe also shows the changing data. If I click play in the converter I receive the message to start the game. I've already searched the forum but could not find a solution or detailed information how outsimDirt2.exe -> Extractor -> Converter are communicating.

I have managed to get X-Sim to talk to my Arduino controller, I am sure that they are communicating, but I do not know what it is sending, I have tried to display it on an LCD screen and I only get white boxes, I am inexperienced with this subject but am eager to learn, thanks in advance for any assistance