News of Converter questions

Hi,

Can anyone help me?

I use the USO output to an Arduino Mega card, to control 6 servos.

I use the following formula

S~a01~R~a02~Y~a03~W~a04~P~a05~H~a06~

My servo turning, but not with one smooth motion

Look this video http://youtu.be/InvPT-C_Oe0

Has anyone an idea to solve this problem.

Sorry for my bad english.

Regards Charles,

Hi,
  For some time I try to adjust this plugin and I do not know how? :(

Example: I choose 10hz and 100hz minimum as maximum, then I selected in G-Force RPM gives me 0min - 1000 max (example) and if I choose 50% in the intensity, it means that I have a sound 10hz-45Hz (50%). Now, what if I want to add an additional force ...

guys, i was reading the manual, and running the first tests, and i can get any impot information from converter, i am doing this:

1. in the extractor, i select a pluging for lfs, from the cloud,
then i hit play game

2. the game begins in practice mode

3. i get in the converter screen and then hit, start...

4. then in converter, i hit the imput set up, to see if the values ...

Hi to everybody and excuse my English.I have a problem with the converter.I use a card k8055 + vm129 on hydraulic system. The position of the pistons as like rock'n ride. 2 lan pc with win 7 and x-sim vers. 3.0.0.7.
Unfortunately when I begin to play, sometimes after 2 minutes, sometimes after 10 seconds, appears me this writing and the converter crash: "interface dll was not loaded" For the first 2 days everything work ...

Hello!

My 2 schoolmates and me are building 3DoF pneumatic simulator as a school project.
We are using Velleman k8055n control board using six outputs for 3 axis in x-sim converter (previous profiler) and we are testing with LFS.
On the hardware side everything works because we can manipulate with our simulator using buttons connected to pneumatic valves but we have hard time with software since we still don't know how to set up math ...

I'm on a project to create a dynamic simulator 3DOF motor with 4 wiper motors.

The mechanical part is constructed and is operational with the Velleman software. I use a Velleman VM140 interface (K8061) and 2 sabertooth 2x12A to drive wiper motors.
With the system I have developed the 4 motors are powerful enough to run my project.

However, I have a problem to programm X-Sim.

I programmed a line of motor control that I ...

Hello everyone! I kindly ask your help.my simulator has a piston front (Y) and one lateral (X).
I downloaded the latest version of x-sim(3.0.0.6). When I use the official plugin (example Dirt 2) and send data to converter everything ok, When I start the race x-sim crash! Interface was not loaded :-(. If I launch only Y axes and I play the game with plugins all ok! ...

Hi,

I got a new desktop in order to run everything on one pc. Before on my laptop I downloaded x-sm 3 and everything was working fine and was able to log online as you would see my IP address in the converter.

Now in my new Desktop with Windows 7 i loaded the x-sim 3 and when I start the converter my IP address does not show and so my sim wont work.

How ...

Is there a way to get accurate yaw speed out of the Converter? Yaw angle is easily enough obtained because this data comes right out of the Extractor as a raw input value but I want rate of change of this value, positive and negative. I'm stumped.

I'm really new to this, so please excuse me if this is super easy.

Thanks for any help.

I have now added a third degree of freedom for my Sim. Now I need some advice please on profiles Guru: sos:

The third dof is to serve as a "traction loss" module and works beautifully in iRacing. There I use 32nd effect

Now I would like to proceed in Race07 well. Unfortunately, this is apparently not supported by the game itself. I have also tried the yaw effect, but this seems not to be ...