News of Motors

Good day!
On the 4DOFbase device we have, the right axis works 2 times less than the left one,
While on the display of the frequency converter of the left engine the figures (revolutions?) Are half the right.
When calibrating the bed frame, both axes (left and right) are raised o at the same time (with the same numbers on the display of their frequency converters). The problem arises directly in the game (thinking about ...

Hi all,
I'd like to use stepping motors, like this as example:
http://www.rta.it/en/category/2312-stepping-motors

I'm trying to figure out what kind of logic board I have to use to pilot that kind of motors with X-SIM.

thank a lot

Hello

I always have the same problem with a piece into the engine, a dentate circle (attached pictures) it breaks easily. I am looking for these kind of pieces for these motors in other stronger material (metal). Anybody knows something about? Or other stronger motors

Thank you in advance (sorry for my English)






Enviado desde mi iPhone utilizando Tapatalk

Hallo,

was haltet ihr von folgendem Motor
https://eckstein-shop.de/V-TEC-Turbine- ... -130-U-min
sind 130 U/min ausreichend? Wieviel Nm sollte ein Motor haben für ein 2 DOF Vorhaben.

Grüsse
Peter

hello to you all I search engines (dc) not very expensive to create a 3DOF simulator. thank you

Hi,
Had a look at this forum about Motors, most of them are AC motor + gear head powered by VFDs, has anyone here used AC servo motor eg., Mitsubishi MRJ2S or Yaskawa Sigma 7 on their 6DOF platforms?, I use a lot of MRJ2S on desktop cnc machines and planning to use it for my simulator project as well.
I have 2 MRJ2S on my desk 1 is set in position mode and the ...

Hi I am having problems with the bike shield stops sending power to the left engine, disconnect the pin and analog I reconnect and work again for about 40 seconds
This happens using Project CARS me, ne tested with no other
probe with sirnoname and prlilad and pass the same in both, also bought another arduino one another Shiel bike and the same
PLEASE HELP me this crazy thereby returning

Hoping someone will reply to this since no on replied to my last post. My son and I are ready to motorize his joyrider for rollercoaster simulator. I've spent hours looking for brand names/model numbers of wiper motors that could power a joyrider. Thanos' wiper motors he used for his seem perfect since watching his video has me convinced his setup is perfect for rollercoaster simulation. All I lnow is they are made by Nissan. ...

I saw these on Amazon, they do have a 12v 60w 100rpm version. Is that fast enough?

Hi guys,

actually i'm completly redesign my simulator and will add the third axsis for TL.
At the moment i use normaly wiper motors with an arduino + H-bridge combo,
but i will change this, because this combo doesn't configurable in the PWM so much,
so my motors a still noisy, i mean really noisy...
Here is an link to an old video of the first test and if you turn up the speakers you ...