News of X-Sim Q&A/FAQs

I've been trying to setup my profile for the location etc... but I keep getting this:

Antispam: You can't have a profile yet. You need to post a few times first.

How many posts do I have to make before it's unlocked?

Thanks in advance

Gwakefield

I am pretty sure I read about this setting somewhere when I started using the x-sim software experience, but now I can't seem to find it anywhere. Does anyone know IF and HOW it's possible to turn off the nice lady's assistent voice. (It's too loud compared to my racing games, she's actually louder than a full throttle digital Zonda R).

Hi
I've downloaded the X-Sim Installer however when I install and run it, I am told that it needs real-time connection with the server and that if I require offline functionality, I need to get a different version. I can't see that, but I see posts referring to an offline key.
I require an offline version/key to enable me to test the software on an isolated secure network.
Can you help please?
Thank you
Bjorn.

Hello Simers,
I'm trying to make a simple 2 axis (pitch & roll) profile for use with FSX.
Should I use #33 (2F78) for roll(to bank) ?
When connected to Extractor, the Converter input setup list show a ocillating values at #33.
I've donloaded the newer FSUIPC 4949 and not solve it.

Thanks,
Maurilio.

Hello people. I built the simulator 2dof Arduino , moto monster and the firm of sirnoname and everything works great. Now I want to add a third engine to simulate the loss of traction. Would be to require information , and especial the arduino code...

Hello everybody, and sorry for my english...I'm Denis and follow xsim since 1999.However, I have just finished a new station with hydraulic pistons back (like simforce gt), So far my CONFIGURATION was always like Rock'n'ride with a piston on each axes. I always use a card K8055 but my CONFIGURATION changhe and totally do not understand how to xsim be set with left and right actuator Working in Combined. Does anyone have any advice or ...

Hello guys,
I tried opening my extractor to see how do x sim works cause i am a newbie in this , however i keep getting the error message of "X-sim server not reachable, ... you will need direct internet access with port 0,80,81 and 3306. So is there anyone that can help me with this? and do anyone know where can i read on how to extract information fs9? cause i am really a ...

Hi,
I would like to generate motion data in 6DOF configuration, using a game controller or test plugin.
Can I do that using X_sim
Regards
Mario

Hello
I have a question because if I play the volvo game, on the beginning for few minutes is everything going well. But after that the X-Sim software is changing the movements in to very low. I mean the strongness of the movements is changing like to safe mode. Without any power just very low movement. After checking the Real Time result analyzer you also can see the difference between the beginning of the game ...

G'day,

After many fruitless searches through the manuals and forums I still cannot find which TCP/UDP ports need to be opened to get the Extractor to talk to the Converter over a firewalled network. Would someone please post which ports need to open.

Thanks,

EDIT:

The extractor only establishes network coms with the converter after the "Play Game" button is pressed on the extractor. With both apps running at the same time on the two ...