3DOF power simulator

by **Pablo** » Fri 17. Aug 2012, 20:02

Hi, here is one, u$s 2.44 with free shipping ...
http://www.ebay.com/itm/New-1602-16x2-HD44780-Character-LCD-Display-Module-LCM-blue-blacklight-/140738656157?pt=LH_DefaultDomain_0&hash=item20c4ad779d#ht_2692wt_952

Regards

by **thecure** » Sat 18. Aug 2012, 00:13

but as the nearest locations are not there? Hong Kong, China ... the delivery time? .. Too long

by **motiondave** » Sat 18. Aug 2012, 05:32

thecure wrote:but as the nearest locations are not there? Hong Kong, China ... the delivery time? .. Too long

picky....picky..... :lol:

by **thecure** » Sat 18. Aug 2012, 12:30

data can be seen on x-sim, or the display and necessary?tks

by **tronicgr** » Sat 18. Aug 2012, 15:35

thecure wrote:data can be seen on x-sim, or the display and necessary?tks

Not to hijack basthard's thread but:

The data on the AMC1.6 LCD is to make sure you have correct communication and calibrated position feedback. After the initial tests you should turn off the refresh of data on LCD to achieve better response for the motion control (you gain another 200 cycles per second by disabling the LCD).

Thanos

by **thecure** » Sat 18. Aug 2012, 16:31

basthard wrote:Hello guys,

Me and my friend Thecure we are putting together a project that has been ongoing for many years, since before it came out xsim.
discover this site was a breath of fresh air for our minds, because we were stuck.

Now we managed to put together the forces due to electronic discovery right here.
We still have some "small" problem with the motor controller of the rotation because of electrical noise that brings us to the K8055 and sent in error.

begins with posting the video link of the beta test: http://youtu.be/Edsc_NUHLcQ

from here with the time, I will explain the entire procedure. If successful

sorry for bad english but it is easier to write fast with google

for the moment is everything .... a greeting Basthard