Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbridge

Topics and questions about other X-Sim compatible hardware

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby ferslash » Tue 21. Aug 2012, 18:01

but if you use pololu cards, you don't need another card to interface to the pc, pololu can do bouth jobs, interface and drive the motors.
(at least it is what i have've got in the forum)

fer
ferslash
 
Posts: 226
Images: 4
Joined: Tue 3. Jul 2012, 18:08
Location: Mexico, Guadalajara
Has thanked: 8 times
Been thanked: 1 time

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby tronicgr » Tue 21. Aug 2012, 18:19

He is using these that are cheaper than the JRK12v12: Pololu High-Power Motor Driver 18v25

Its just the motor driver part.

Recently I discovered these High Current Dual Motor Driver Module Board ** with Heat Sink, that beat even pololu's motor driver price with dual motor driver support and fully compatibility with AMC1.6.


Thanos
User avatar
tronicgr
 
Posts: 624
Images: 11
Joined: Tue 20. Mar 2012, 22:10
Location: San Diego, CA
Has thanked: 130 times
Been thanked: 50 times

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby motiondave » Wed 22. Aug 2012, 01:59

Tronics card takes some setting up, sourcing of parts and other things, but can hook up to different h-bridges.
The pololu JRK is a good all in one, but is restricted to 12-14v motors up to 30 amps, but is easy to set up.
User avatar
motiondave
 
Posts: 997
Images: 1
Joined: Tue 20. Mar 2012, 16:36
Location: Sydney Australia
Has thanked: 11 times
Been thanked: 13 times

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby ne02005 » Mon 3. Sep 2012, 21:11

Hi this my NEW version MINI AMC 1.6 with all needed to conect 2 wipers (only 2 pots NOT 8). All unnesesary things were removed!
And the soldering islands are more bigger.

The board is 8 x 8 cm.



Image
By ne02012 at 2012-09-03

Image
By ne02012 at 2012-09-03




bye
ne02005
User avatar
ne02005
 
Posts: 36
Images: 0
Joined: Fri 13. Jul 2012, 22:00
Location: Buenos Aires - Argentina
Has thanked: 3 times
Been thanked: 0 time

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby ne02005 » Mon 3. Sep 2012, 21:46

motiondave wrote:Tronics card takes some setting up, sourcing of parts and other things, but can hook up to different h-bridges.
The pololu JRK is a good all in one, but is restricted to 12-14v motors up to 30 amps, but is easy to set up.



Is this Pololu JRK compatible with Xsim?? Iwan to use it with 2 wiper motors.
I´ll need 2 identicals boards for both motors?

Thanks
User avatar
ne02005
 
Posts: 36
Images: 0
Joined: Fri 13. Jul 2012, 22:00
Location: Buenos Aires - Argentina
Has thanked: 3 times
Been thanked: 0 time

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby motiondave » Tue 4. Sep 2012, 01:46

Yes the pololu is compatible with x-sim
heres a video of how to set the jrks with x-sim http://www.youtube.com/watch?v=rb5tK4oMQy8
yes you need one board per motor. They are a control board and h-bridge in one.
http://www.pololu.com/catalog/product/1393

Just curious, you have built the AMC, does it work?
User avatar
motiondave
 
Posts: 997
Images: 1
Joined: Tue 20. Mar 2012, 16:36
Location: Sydney Australia
Has thanked: 11 times
Been thanked: 13 times

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby ne02005 » Tue 10. Sep 2013, 19:40

Hello guys, after a long time of abstinence, I´m back again.

I was working again and making some modifications to my Sim...

on a few days will get some pics.

Bye!

:ugeek:
User avatar
ne02005
 
Posts: 36
Images: 0
Joined: Fri 13. Jul 2012, 22:00
Location: Buenos Aires - Argentina
Has thanked: 3 times
Been thanked: 0 time

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby ne02005 » Fri 13. Sep 2013, 13:54



Here is first tests with Pololu Hbridge (amazing) very smooth...
User avatar
ne02005
 
Posts: 36
Images: 0
Joined: Fri 13. Jul 2012, 22:00
Location: Buenos Aires - Argentina
Has thanked: 3 times
Been thanked: 0 time

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby prodigy » Sun 15. Sep 2013, 17:47

It's going smooth..
Have you tested it with weight on, yourself on the seat?
User avatar
prodigy
X-Sim Supporter
 
Posts: 274
Images: 42
Joined: Tue 16. Oct 2012, 12:32
Location: Pula, Croatia
Has thanked: 20 times
Been thanked: 21 times

Re: Ne02005´s simulator 2Dof wipermothors AMC1.6+Pololu Hbri

Postby ne02005 » Mon 16. Sep 2013, 13:53

prodigy wrote:It's going smooth..
Have you tested it with weight on, yourself on the seat?



Thanks, Yes I´ve tested it! works very nice! the AMC+Pololu 18v25 bridge works great!

BUT I´m having troubles with my ATX PC PSU´S, they are shutting down all the time.

With old Thanos Hbridge they works great, but now they don´t supports it...

I need to upgrade the power supplies or maybe use a car battery.....
User avatar
ne02005
 
Posts: 36
Images: 0
Joined: Fri 13. Jul 2012, 22:00
Location: Buenos Aires - Argentina
Has thanked: 3 times
Been thanked: 0 time

PreviousNext

Return to Other X-sim compatible hardware

Who is online

Users browsing this forum: No registered users and 1 guest