News of Converter questions

I build a wiper motor 2-dof chair , like http://x-sim.de/forum/viewtopic.php?t=1617topic
However i'm having some problems setting it up.
The arduino works (manually sending values works).
I tried to setup math with the wizard (3 axis, but send only the left and right to the arduino.)
I thought it was working (a bit, not fluent yet), but for some reason it sometimes does not work (just no movement, it seems that nothing is getting to the ...

xsim (1).png

I have a problem in the INPUT section;

I can only get value up to 1.0 for longitudal, laterial & vertical . Most of the time they are 0.5

If I tick the box "unify values 21-40 start at"

Then I can only get values on the input up to 2000 and no more!

This is the case for both GTR2 and Live For Speed.

The extractor and the ...

Buona sera, sono nuovo del forum e come prevedevo mi vedo già costretto rompervi le scatole. :) Sto muovendo i primi passi ,ho installato x-sim scaricato da qui, premetto che non possiedo alcuna postazione dinamica , ma volevo ugualmente prendere famigliarità con la parte software del simulatore facendo delle prove anche con arduino.
Il mio problema è che lanciando assetto-corsa tramite l'estrattore , monitorando il convertitore durante ...

Friends I've set up sim can not get data from the game engines do not have constant wonder but i have such a problem why they are working outside while testing the converter owp ip looks

Just realized that there's an updated Version 3.0.3.0

After upgrading, the Pololu Plugin is not working, it's not even listed under the plugins.
I copied the plugin file from the previous version, and it's working.

So it seems there is some kind of problem with the new build of the plugins.


martin

Hi all,

After surfing on the forum I still can’t solve my problem, that I will try to describe below with what I have done so far:

I used to run X Sim Converter on a second PC (small and old laptop running Windows XP (!)) using wireless connection and it worked perfectly.
Now the wireless network card (of this second PC) no longer works correctly, often getting disconnected (driver is up to date), and ...

Hello,
has anybody the same problem as i have, since yesterday evening the converter doesnt work anymore.
The erroe code is Error TCP 4449 listen. Any ideas?

Hola a todos,

Despues de horas y horas y cambios de potenciometros, pese a tener los dos ejes configurados igualmente, no consigo que el motor conectado en X-sim posicion 1 se estabilice, le mando valores al 10% y sin problemas, al 25% no reacciona y para valores mayores empieza a subir y bajar sin conseguir detenerse.
Por favor agradeceria alguna pista de alguien que ya haya conseguido solucionar esto.

Gracias a todos por vuestro esfuerzo ...

Hi everyone, guys!Sorry for my english. I asked this: After three months of stop, today I restart my 2dof (still run by the old k8055) and surprise ... the converter crash. remove the usb card and converter start (no hardware found obviously, reattachment with converter open and re-crash.Now
Win 10 automatically associates drivers with the k8055 (HID) and I thought it was mine but I can not get around ...

Good, I'm trying to adjust dirt4 with the liveforspeed plugin, I add the vertical effect force, automatic frame max value, until there is all perfect I receive the telemetry and I see the math setup graphic, but when removing the automatic adjustment and testing the movement the cockpit does not does nothing, however with dirt2 and the codemaster plugin works of luxury, any solution?