News of Converter questions

hola gente desde hace ya dos semanas vengo configurando el profiler para sabertooth y velleman vm 110 y no tengo manera de conseguir que funcione correctamente si alguien pudiera explicar su correcta configuracion o subir un archivo base para partir de ahi lo agradeceria enormemente SALUDOS

hello people from two weeks ago I came to configuring the profiler and Lcd sabertooth vm 110 and I have no way of getting it to work properly if ...

Its probabbly on the old board somewhere, but lets move forward and post it here.

For a 2 DOF wiper motor simulator to fell realistic, what way should the chair move when I:
Accelerate.... chair = forward?
Brake... chair = Backwards?
Turn left... chair = left?
Turn Right... chair = Right ?
Nose pitches up hill = chair leans back?
Nose pitches downhill = chair leans forward

The accelerating and braking seems to make sence ...

Hi,

I was developing my digital dashboard this morning and took me some time to export correctly the speed/rpm/gear data I wanted. The problem seem to be that the only math output that can be used is the g-force one and it stretches the output value to fit the size of the USO packet. Its does that resize to either 8-bit or 16-bit packets.

Is there a way to sent to USO the values of ...

Question about actuator center position.

I am using the mini ssc2 USO serial device and testing things on the work bench with just standard R/C servos to get an understanding of this software and the profile setup all works. (my actual sim char isnt built yet)

I created a simple profile and set up my USO initiation strings to output a center position command (127) to the servos at start and stop, and this is ...

3.0 Converter crashed on me and would not not restart, I have redownloaded and reinstalled it twice and can not get it to run anymore!? when starting the program I get the spinning circle to go...then "Program has stopped working" error Any ideas?
Thanks

Hi

can this be made to work with X sim3

specs looks good 12-24volt 40amps run 60amp for 2 secs

internal heatsink/fan for cooling,

available in the uk for £80.00

please see attached user guide for serial command structure

regards Terry