News of x-sim

Hello !!! Sono un nuovo utilizzatore di questo software e sto iniziando a costruire una postazione 2DOF.

Hello there, I have become part of this community as I have been given the order to produce a 2DOF motion simulator as part of the finals of my high school Engineering grade. For this, I will need the X-Sim software and perhaps some expertise from some of the guys here. We plan on using pneumatics. We are basing ourselves off of the LifeBeam FlightSim. At this time I have already figured out the configuration ...

Mécanicien de formation, passionné de conduite sur simulateur, je réalise dans la ville de sèvres une plateforme d'effets physiques.

Il me faut pour commencer les choses sérieuses, faire se déplacer un axe dans deux directions. Actuellement je contrôle mon axe manuellement au moyen d'un potar et d'une consigne analogique mais je peux aussi le faire de façon numérique.

Je ne suis pas assez doué en informatique, j'ai donc besoins d'un partenaire qui me dise s'il ...

ciao ragazzi,mi potete dare un link dove ci sia il profilo converter di project cars?non il plugin,ma il profilo con le slide.grazie

cockpit2.jpg

Due to some improvements in my rig I want to sell my GS4 bought directly from Pat Dotson (USA) in 2013 (December).

The whole unit is in very good condition. For your verification check my lousy statistics at iRacing to evaluate possible wear of GS4. It was powered by SC 4 set to 50-60% of intensity.

All is working as it should.

In US the price of SECOND HAND GS4 ...

Specification:
Material: Aluminum alloy
Color: Silver
Rated Voltage: DC 12V
Stroke Length: 100mm/4 inch ,20mm , 50mm/2 inch
Load capacity: 500N
Speed: 200mm/s
Duty cycle: 20%
Net weight: 750g

Package Included:
1 * Linear Actuator Motor

Kann mann die brauchen ?
Soll einen seatmover antreiben
Gesamtgewicht incl.mir ca 120 kg
Das ganze ist ist auf einem kreuzgelenk gelagert
gallery/image.php?album_id=441&image_id=4190&display=popup

Buongiorno a tutti mi chiamo Davide e sono un nuovo utente. Scusate se sono imbranato ma e la prima volta che mi registro ad un forum.
Mi sto cimentando per la prima volta con i simulatori di guida e devo dire che mi diverto un mondo.
Avevo bisogno di alcune informazioni per poter configurare correttamente la pedana 2dof della Giantruck .
ho installato i software x-sim converter e x-sim extractor e poi mi sono arenato. ...

20160917_171449.jpg

My new Projekt: Flight simulator with motion seat 2 Axes (+/- 25°) and almost real Cessna 172 cockpit. Beginn Juni 2016.

Hallo,

ich versuche den American Truck Simulator (ATS) zum laufen zu bekommen. Da dieser wie der ETS2 aufgebaut ist und ich gelesen habe das dieser auch funktionieren soll.

Mein Problem besteht darin das das Spiel auch wenn ich es über den Extractor starte und nicht vom Converter erkannt wird.
Das spiel startet wenn ich dann aber zum Converter wechsel und diesen über den Start button aktivieren möchte kommt diese meldung:



Hoffe jemand kann mir ...

Hi Guys

I would like to show you my new finished project of an Motor driver for my 2dof.

Specifications:
Supports two motors max. 350Watt/12V.
Connection to Arduino UNO board.
Connection for two Indicator LED`s.
Connection for two potentiometers.
Connetion for safety button.
Reset Switch connection.
Including a cooler fan and a big heatsink
The Motor driver have build in safety power off if the temperature goes over then 65°C.

After my tests with two ...