News of x-sim

Hi Guys

I asked this question over at x-simulator_de but the silence was deafening.

My intention is to build a 3DOF motion platorm mainly for racing sims.
I have at my disposial a bunch of indrustrial Servo motors, drives, power supplies and gear boxes sitting around and I intend to utiluse these in my simulator.

The problem I have is my servo drives have +10V to -10V DC velocity input signal requirement. 0v being no ...

Some time ago I wrote about this project:

"" The "Ultimate MSx-R" :
Concept:
"Ultimate MSX-R".
"Baby MSX-R" to "Ultimate MSX-R"
the evolution of the project, following logic:
"Ultimate MSX-R" can be anything you want!
This new chassis concept "Ultimate MSXR" is compatible 2DOF/3DOF/4DOF/6DOF . (It may ask that instead of my current cockpit, I keep the base for the moment!).
it is possible to transform the chassis to achieve different simulators with the designs ...

I have had motion simulation for a while (v2.0) and it was great.
A friend told me that v3.x was even better. I uninstalled v2.0 and have just DL v3.0.0.7b.
I am looking for information on installing the software. I had previously loaded v3.0.0.6. Said it was necessary to load games before installing. This was from PDF's available once v3.0.0.6 was loaded. I presume that installing v3.0.0.6 without first installing games would have been a ...

Hello, I have a Fex-Like who work with X-Sim anf I want to know if there is a solution for NetKar Pro.

Thx

Today I would like to present you with the latest firmware changes for AMC.
The difference is so big that I thought it makes a nice piece for the news page.

I was hopping to fix the really noisy ADC function for several years, and I finally
got it. Now it follows closely the potentiometer and the measurements are not
affected by motor power noise or other parasitic noise from environment.

To achieve that noise ...

Hallo,

ich nutze seit einigen Tagen meinen Bassshaker mit der X-Sim Software, funktioniert tadellos! Vielen Dank für dieses feine Stück Software.

Allerdings habe ich da ein Problem, ich fahre nur iRacing, nach einer gewissen Zeit (Ich glaube, nach einem Boxenbesuch) verabschiedet sich der X-Sim Converter. Manchmal stürzt er ohne Fehlermeldung ab, manchmal ist er noch aktiv, hat aber keine Verbindung mehr. Manchmal reicht es dann einfach wieder auf "Start" zu klicken, manchmal muss ich das ...

began! with searching the net, reading reading and reading the electronic issues and not understand, then go search the field for items may be ready to have,

forund my uncle who ordered me 10 :!: used mercedes 302 bus wipers 12 v for 10.8€ each :D

arranged the place I am going to work (photos will ...

Hello guys!I need your help.My simulator now is really good!I'm happy but i have a problem with rbr plugin (x-sim 3.0.0.7). When i press PLAY GAME, richard burns start ok, the converter dialog with extractor only 3 seconds and then "Disconnected". I try to solved in many Ways but i don't understand wich is the problem,.
Thanks a lot and sorry for my english.
Denis

Hi everyone;

As I described at the page mentioned below I wanted to do 2DOF...
http://www.x-sim.de/forum/viewtopic.php?f=3&t=20&start=130

After a lot of searches; I CONFUSED SO MUCH... :shock: I dont know what I will do...

I bought SAITEK X52 PRO FLIGHT CONTROL SYSTEM & SAITEK PZ35 PRO FLIGHT RUDDER PEDAL from turkish suppliers with a amount of 526 TL (1€=2,3 TL) it is approximately €230.

Yesterday I ordered Velleman ...

Hi all.

Glad to find this site, looks like I will be learning a lot here :D

Currently I build custom arcade machines and I refurb old classics for my home. Here are a few examples of my projects...

Scratch Design & Build, Pololu driven rotating monitor cabinet


Kids Tabletop Cocktail Cab (In progress)


Paperboy Resto-Mod (In progress)


For my next custom scratch ...