News of Controllers and Drivers

Hi! im new at this forum and i have planned to build a motion simulator for the first time.
Because my economy at the moment isn't that good my goal is to build it mostly with used parts from scrapheaps and such.
I know its quite a challenge but also a lot of fun.:)

I have gathered some Freq drives so far and they are 2 Yaskawa ...

Hi Guys!!

Please, i need help with my 2dof project!

I'm stuck in SMC3 test. I'm using the Pololu drive shield 24v and a Arduino Uno.

When i use the demo code provided of the Pololu support for test the functions. the two motors respond correctly. so, seems the shield, connections and the arduino is ok, i think..

But when i go to the smc3 for test the moviments with the potentiometers, the motors dont ...

La presente es para pedir colaboracion ya que tengo problemas porque los motores no tienen movilidad y la razon es que al utilizar xSimCTRLv2.2eng puedo obtener valores de receiving data pero al enviar datos a AMC no hay respuesta de movilidad de los motores.

Espero sus recomendaciones..

Friends, I'm thinking of developing a controller card for a 2dof with PIC microcontroller, especially the pic18f4520, and I need to know which communication protocol the X-Sim program uses in the controllers. Does anyone know what it is?

Hola desde Colombia

Hi all!
Finally got around to continue this project I started many years Ago!
I build the frame, added 2 wiper motor (2 DOF) and thanks to Mr Thanos and many others at the time build the h-bridge.
But after few test and runs it burned out. I think I order parts to fix it but realized there was a new version of the board,
To make the story short after a new start frustration ...

Hello,

I would like to know if it is possible to use x-sim with Linear Actuators smcusa with the LECP6 serial communication.

Best regards,

Nicolas

Hello i need help please with 2dof some games going ok in right way but some games going different way i means when i brake sim going backward
is posibble setup this in x-sim software? i have connection problem?

I start with try to build I motion simulator a long time ago.... and now I want to start it again....

I have part already... and nou I use the USO in the control software... and I build something with a pic.... but because the moest computer don't have a com-port anymore I want something else....

maybe a Arduino.... but how to use it? serial... is there somebody with a example?

thanks already...

Hello guys,

I have to use a power driver for my 24V 20A gearmotor.
I thought of using the Sabertooth 2x25 (for my 2dof), but I also saw that 2x32 version exists, at the same price.

Is the 2x32 usable with Arduino?
Is xpid code available?

Thanks for your help